Print Output Tips movie / Plate

On the basis of how the output or print the film to CTP or equal to the time of print with ordinary printers, the difference is the media only. But with a few things to note in the output movie / CTP at the graphic design program:

1. LPI

for LPI usually on ImageSettter / CTP already gives a chance some LPI from the smallest to the largest, but in general LPI 45, LPI 65, LPI 85, LPI 133, LPI 150, LPI 175, so now create a file for output from graphics design software should not LPI setting.

2. Color

for any output color BW, Separation Process, or Special Separation. But if there is a special color to be color-programmed process of graphic design time to file postcript / PDF can be directly converted into the process.

3. Postcript or Pdf file



for now all the machines Image Setter / CTP can receive the file. But in the output file / print graphic design document is not always smooth with the type of file. Sometimes with a PDF file can not be but by using a file can be smoothly postcript this may depend on the design document file.

4. Font / Image

On the use of font or image on the document even though the design does not happen tpublikasi missing font / image font sometimes when the output at Imagesetter / CTP was not such a chill, such a font courir on the film / plate.

5. Overprint / Bleed

Overprint this term that often makes a mess of prints, sometimes the designers do not pay attention to this example in the publication of cyan color image inadvertently overprint on yellow background, even to the monitor display another cyan prints can be green, Similarly, the bleed, which is safety area beyond the cut line.